640x480 VGA CMOS Camera Module OV7670 FIFO Buffer AL422B SCCB compatible with I2C

The OV7670 is a low cost image sensor + DSP that can operate at a maximum of 30 fps and 640 x 480 ('VGA') resolutions, equivalent to 0.3 Megapixels. The captured image can be pre-processed by the DSP before sending it out. This preprocessing can be configured via the Serial Camera Control Bus (SCCB). It's very useful for Electronic lovers, you can use the camera with STM32 or even with Arduino.

Features:

• High sensitivity for low-light operation
• Low operating voltage for embedded application
• Standard SCCB interface compatible with I2C interface
• With AL422 3M-Bits FIFO
• Raw RGB, RGB (GRB4:2:2, RGB565/555/444), YUV(4:2:2) and YCbCr(4:2:2) output format
• Support VGA, CIF and from CIF to 40 x 30 format  
• Vario Pixel method for sub-sampling
• Auto Image Control: AEC, AGC, AWB, ABF, ABLC
• Image Quality Control: Color saturation, hue, gamma, sharpness and anti-blooming
• ISP includes noise reduction and defect correction
• Support image scaling
• Lens shading correction
• Flicker 50/60Hz auto detection
• Color saturation level auto adjust
• Edge enhancement level auto adjust
• De-noise level auto adjust

Parameters:

• Photosensitive Array: 640 x 480
• IO Voltage: 2.5V to 3.0V
• Operating Power: 60mW/15fpsVGAYUV
• Sleeping Mode: <20μA
• Operating Temperature: -30 to 70 deg C
• Output Format: YUV/YCbCr4:2:2 RGB565/555/444 GRB4:2:2 Raw RGB Data (8 digit)
• Lens Size: 1/6'
• Vision Angle: 25 degree
• Max. Frame Rate: 30fps VGA
• Sensitivity: 1.3V / (Lux-sec)
• Signal to Noise Ratio: 46 dB
• Dynamic Range: 52 dB
• Browse Mode: By row
• Electronic Exposure: 1 to 510 row
• Pixel Coverage: 3.6μm x 3.6μm
• Duck Current:: 12 mV/s at 60℃
• PCB Size (L x W): Approx. 1.4 x 1.4 inch / 3.5 x 3.5 cm