Online only

Timer Relay Module 12V 24V Delayed Power-Off Switch On Trigger Delay Cycle Timing Circuit Switch

TIMER-RELAY-MODULE

New product

2 Items

Warning: Last items in stock!

share

By buying this product you can collect up to 44 loyalty points. Your cart will total 44 points that can be converted into a voucher of ₹ 2.20.


₹ 440.00

Add to wishlist

More info

One-way relay module delays power-off and triggers a delay cycle. The timing circuit switches the timing range: 0.01 seconds to 9999 minutes.

This product has a liquid crystal display, which is very clear, easy to use, and powerful, but buyers please read the operating instructions of this product in detail. Very practical product

 

 

Product features:
1. With LCD display, the current mode and parameters are clear at a glance, very clear and easy to use;
2. Support key trigger control, high and low level trigger, switch value control, suitable for most occasions;
3. Wide voltage power supply (6 -30V), use very build orders;
4. Support UART data upload and parameter setting;
5. Have a pause function, with reverse connection protection, reverse connection does not burn;
6. Added sleep mode, after enabling, about 5 minutes Automatically turn off the LCD backlight without any operation; wake up with any key;
7. Different OP, CL, LOP parameters can be set, these parameters are saved independently of each other;
8. All setting parameters are automatically saved after power-off;

Product parameters:
Working voltage: 6-30V power supply;
trigger signal source: high level trigger (3.0V-24V), low level trigger (0.0V-0.2V), switch value control (passive switch);
output capacity: Can control devices within DC 30V 10A or AC 220V 5A;
static current: 15mA;
working current: 50mA;
service life: more than 100,000 times;
working temperature: -40-85 ℃;
product size: 7.1 * 3.9 * 2.5cm
Timing range: 0.01 seconds to 9999 minutes (peak) continuously adjustable

With optocoupler isolation, enhanced anti-interference ability, industrial-grade circuit board, always remember after setting parameter points.

Working mode:
P0: After the signal is triggered, the relay is turned on for 0P time and then disconnected; within 0P time, the signal is triggered again and is invalid ;
P1: After the signal is triggered, the relay is turned on for 0P time and then disconnected; within 0P time, The signal is triggered again to re-time ;
P2: After the signal is triggered, the relay is turned on for 0P time, and then disconnected; within 0P , the signal is triggered to reset again , the relay is disconnected, and the timer is stopped;
P3 : After the signal is triggered, the relay is turned off for CL time , And then the relay is turned on;
P4: Give the trigger signal, after the relay is turned on for 0P time, the relay turns off the CL time, and then cycle the above action, give the signal again in the cycle, restore the initial state, stop timing; the number of cycles (L0P) can be set ; End of the cycle, keep the relay off ;
P5: Give the trigger signal, after the relay is turned off for CL time, the relay turns on for 0P time, then cycle the above action, give the signal again in the cycle, return to the initial state, and stop timing; the number of cycles (L0P ) Can be set;At the end of the cycle, save the relay on ;
P6: No trigger signal is required after power-on. The relay is turned on for 0P time , the relay is turned off for CL time to cycle the above actions. The number of cycles (LOP) can be set and the cycle is ended to keep the relay off .
P7 : No trigger signal required after power on, relay short-circuit CL time, relay ON OP time, cycle appeal action; cycle here (LOP) can be set; cycle end, keep relay on ;
P8: signal hold function, if there is a trigger signal When the timing is cleared, the relay remains on ; when the signal disappears, the relay is disconnected after timing 0P ; during the timing, when there is a signal, the timing is cleared; P9: signal holding function, if there is a trigger signal, the timing is cleared and the relay remains off On ; when the signal disappears, the relay is turned on after timing CL ; during the timing, when there is another signal, the timing is cleared; (P0-P7) mode , short press the pause button, the system starts timing when the system does not trigger timing; the system has timed In the case, the system pauses timing, the relay is disconnected, and “OUT” flashes to indicate;


(P8-P9) mode . Pause the button in the running interface as a trigger signal. The function of the button is short / long press disabled.

Parameter setting:
1. Enter the setting interface through the shore setting button;
2. First set the working mode, the working mode flashes to remind, set the working mode by short pressing the increase / decrease keys;
3. short press the setting button to select the working mode, And enter the system parameter setting;
4. In the system parameter setting interface, short press the setting key to switch the system parameter to be modified. Short press / long press the increase / decrease button to modify;
(Note: in P0-P3 / P8 / P9 mode Short press the setting button is invalid)
5. In the 0P / CL parameter modification interface, short press the pause button to switch the timing unit (1S / 0.1S / 0.01S / 1min);
6. All parameters are set, press and hold the set button to save the parameters Set and exit the setting interface;

Timing range:
how to select the timing range:

in the OP / CL parameter modification interface, short press the pause button to select the timing range;
XXXX has no decimal point, the timing range is 1 second -9999 seconds
XXX.X decimal point is in ten digits, and the timing range is 0.1 seconds-999.9 Second
XX.XX decimal point is in hundred digits, timing range 0.01 seconds-99.99 seconds
XXXX decimal point is all on, timing range is 1 minute-
9999 minutes.

Parameter description:
0P on time, CL off time, L0P cycle times (1-9999 times) "————" represents infinite cycles

Setting function:
remote data upload and parameter setting function; the
system supports UART data upload and parameter setting function;
UART: 9600.8.1

10 other products in the same category:

* Local stocks, Lightning 

fast delivery

*

Every time you shop - no minimum order value.

View details