Online only

INMP441 Omnidirectional Microphone Module MEMS High Precision Low Power I2S Interface ESP32 Supported


New product

6 Items


By buying this product you can collect up to 30 loyalty points. Your cart will total 30 points that can be converted into a voucher of ₹ 1.50.

₹ 300.00

Add to wishlist

More info

The INMP441 is a high performance, low power, digital output, omnidirectional MEMS microphone with bottom port . The complete INMP441 solution consists of a MEMS sensor, signal conditioning, analog to digital converter, anti-aliasing filter, power management and industry standard 24 -bit I 2 S interface. The I 2 S interface allows the INMP 441 to be directly connected to digital processors such as DSPs and microcontrollers without the need for an audio codec for use in the system. The INMP441 has a high signal-to-noise ratio and is an excellent choice for near field applications. The INMP441 has a flat wideband frequency response that results in high definition of natural sound.

Product Features:

1. Digital I2S interface with high precision 24 -bit data

2. High signal to noise ratio is 61 dBA

3. High sensitivity - 26 dBFS

4. Stable frequency response from 60 Hz to 15 kHz

5. Low power consumption: low current consumption 1.4 mA

6. High PSR : -75 dBFS

Interface definition:

SCK : serial data clock for I 2 S interface

WS : Serial data word selection for the I 2 S interface

L/R : Left / Right channel selection.

When set to low, the microphone outputs a signal on the left channel of the I2S frame.

When set to high level, the microphone outputs signals on the right channel

SD : Serial data output of the I 2 S interface.

VCC : Input power, 1.8V to 3.3V.

GND: power ground

INMP441       ESP32 Development Board

  1. SCK >> GPIO14
  2. SD >> GPIO32
  3. WS >> GPIO15
  4. L/R >> GND
  5. GND >> GND
  6. VDD >> VDD3.3

7 other products in the same category:

* Local stocks, Lightning 

fast delivery


Every time you shop - no minimum order value.

View details